What are the differences between LED spotlights and LED spotl

Writer： admin Time：2021-05-27 10:31 Browse：℃

       Today, a comprehensive analysis of the differences between LED floodlights and LED spotlights? Let's take a look!
1. Basic information of led flood light
LED floodlights, also known as LED spotlights, LED floodlights. LED floodlights are controlled by built-in microchips. There are currently two types of products, one uses a combination of power chips, and the other uses a single high-power chip. The former has a relatively stable function, and a single high-power product has a huge structure and is suitable for small The range of projection light shines, the latter can reach a high power, and can be used for long-distance large-area projection. LED floodlights are also known as spotlights, spotlights, spotlights, etc. They are mainly used for architectural decoration lighting and commercial space lighting. The decoration components are heavier, and the appearance is round and square, because Generally, the reason for heat dissipation must be considered, so its appearance is still somewhat different from that of traditional floodlights.
2.Second, the product characteristics of led flood light
(1) The unique waterproof plan of the floodlight series, the tight cooperation and the compact structure, the main body adopts super heat dissipation; the die-cast aluminum structure, the appearance is anti-corrosion treatment, the product appearance is beautiful, high brightness;
(2) It is mainly used for building facade lighting and greening The appearance of tree lighting and stage lighting is novel and fashionable;
(3) Integrated heat dissipation structure meter, LED heat sink-lamp housing surface temperature difference <3℃; (4) Built-in high-efficiency power supply, aging at 80℃ for 48 hours before leaving the factory Test production.
3、Basic information about led spotlights: LED spotlights are spotlights that use light-emitting diodes as the light source. Traditional spotlights mostly use halogen lamps, which have lower luminous power, higher power consumption, higher ambient temperature to be irradiated, and shorter service life. LED light sources are far superior to traditional lighting fixtures in terms of light emitting principle, energy saving, and environmental protection.
4、Product characteristics of led spotlights

(1) LED spotlights can be driven by low-voltage direct current: it has the advantages of small load and weak disturbance, and has low requirements on the operating environment
(2) LED spotlights can better control the luminous spectrum composition, which can be well used in museums And some or key lighting in the exhibition hall.
(3) The luminous directivity of LED spotlights is very strong: the brightness attenuation is much lower than that of traditional light sources, and the price of LED spotlights is civilian.
(4) The response time of LED spotlights is very fast: at the microsecond level, as long as the switch is turned on, it will light up immediately, and there will be no delay or flicker.
 (5) The energy concentration of the light emitted by the LED spotlight is very high: it is concentrated in a small wavelength window with high purity.
(6) The service life is very long, ranging from 50,000 to 100,000 hours. Because LEDs are semiconductor devices, even frequent switching will not affect the service life.

5、What are the differences between led spotlights and led spotlights?

1. The characteristics of led spotlights:
(1) Power saving: The reflector of the spotlight has a strong refraction function, and the power of about 10 watts can produce strong light.
 (2) Concentrating light: gathering light, can highlight or focus on a certain object or space, and the decoration has a significant effect.
(3) Comfortable: The color of the spotlight is close to natural light and reflects the light on the wall without being dazzling.
(4) Many changes: small light bulbs can be used to make different projection effects.

2. LED flood light characteristics: suitable for large-scale occasions flood lighting, buildings and other lighting.
(1) High-purity aluminum reflector, the beam is the most accurate, and the reflection is the best.
 (2) Symmetrical narrow-angle, wide-angle, and asymmetric light distribution systems.
(3) Open-back replacement bulbs are easy to maintain.
(4) The lamps and lanterns are equipped with scale plates to facilitate adjustment of the shining point of view.